ASTM B348 Gr5 Forged Round Titanium Bar

ASTM B348 Gr5 Forged Round Titanium Bar

Titanium Bar Application

1) Chemical or industry

2) Petrochemical industry

3) Machining field, Automobile field, etc

4) Desalination of sea water

5) Textile printing and dyeing

6) Mobile phone component field

Titanium Rod can be produced to titanium screw, titanium tube, titanium Flange, titanium flat bar and so on.

Titanium Rod Detection

Ensuring our customers get the satisfying products, strict test is necessary.

Firstly: Visual inspection to check surface quality, ensuring without flaw, black dot and any other defects.

Secondly: Ultrasonic Flaw Detection making sure there are no defects inside.

Thirdly: Chemical Composition Detection making sure all chemical component can satisfy customer's demands

Fourthly: Mechanical Features testing making sure all titanium bars have satisfying mechanical features before delivery.

1.1 Titanium Bar Dimension

Titanium Bar and Titanium Alloy Bar
Grade	Diameter(mm)	Length(mm)	Quality
1, 2, 3, 4, 5, 7, 9, 12	3.0~600	100~15000	ASTM, AMS, GOST, MIL

1.2 Titanium Bar Mechanical Properties (20 ℃ ,room tempature)

Grade	Status	Room-temperature Mechanical Properties ≥
		σb MPa(Ksi)	σ0.2 MPa(Ksi)	δ4D %	ψ %
GR.1	Annealed (M)	241(35)	172(25)	24	30
GR.2		345(50)	276(40)	20	30
GR.3		448(65)	379(55)	18	30
GR.4		552(80)	483(70)	15	25
GR.5		896(130)	827(120)	10	25
GR.7		345(50)	276(40)	20	30
GR.9		621(90)	483(70)	15	25
GR.12		483(70)	345(50)	18	25

1.3 Titanium Bar Grade&Chemical Content

Titanium Bar Chemical Component(%)												residuals
Grade	Ti	N≤	C≤	H≤	Fe≤	O≤	Pa	Mo	Ni	Al	V	each	total
1	balance	0.03	0.08	0.015	0.20	0.18	---	---	---	---	---	≤0.1	≤0.4
2	balance	0.03	0.08	0.015	0.30	0.25	---	---	---	---	---	---	---
3	balance	0.05	0.08	0.015	0.30	0.35	---	---	---	---	---	---	---
7	balance	0.03	0.08	0.015	0.30	0.25	0.12~0.25	---	---	---	---	---	---
9	balance	0.03	0.08	0.015	0.25	0.15	---	---	---	2.5~3.5	2.0~3.0	---	---
12	balance	0.03	0.08	0.015	0.30	0.25	---	0.2~0.4	0.6~0.9	---	---	---	---

Product Name	bar
Available Sizes	Diameter	Length
	4-200mm	100-6000mm
Titanium Grade	Grade 5
Standard	ASTM b348
Diameter Tolerance	DIA (4.0mm~13mm)	DIA (13mm~50mm )
	+/-0.05mm	+/-0.1mm
Surface Quality	Polished
Production Technology	Rolled
Supply Status	Annealed

Mechanical Properties

Shape	Manufacturable scope	Standard specification	Applicable standards
Bar	Dia.:4~200mm Length: Max6000mm	Hot rolling→annealing→bar turning finish	ASTM	Gr1,Gr2,Gr4,Gr5,Gr7,Gr12
		Forging→annealing→lathe→turning finish

The usage of various Titanium bars detailed description

(1). grade 1 can be used in the drawing parts for its good elongation and excellent corrosion-resistance.

(2). grade 2 is used most widely in the commercially pure titanium

(3). grade 3 is almost used in pressure, vessel.

(4). grade 4 can be used in some fittings parts and fastening pieces, but for complex shape need 300 degree celsius to form.

(5). Alloy grade 5(Ti-6Al-4V) widely used in the titanium alloys, because of its comprehensive mechanical and chemical properties.

(6). Alloy grade 7 add little palladium in cp titanium and it has the most excellent corrosion-resistance, of course it costs higher.

(7). Alloy grade 9(Ti-3Al-2.5V) is the most widely used in the golf clubs and bicycle girders.

(8). Alloy grade 23, ELI(extra low interstitial), can be used in the medical appliance.

Related documents will be provided when delivery.

International Quality Management System ISO 9001: 2008

The third party test is acceptable.

Contact us if you need more details on Gr5 Round Titanium Bar. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Round Titanium Bar、ASTM B348 Gr5 Titanium Bar. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Titanium > Titanium Bar